Mittler-bros-machine-tool 2500-400 Bend Stop User Manual download pdf

Division of Mittler Corp.

P.O. Box 110 Foristell, Missouri 63348

10 Cooperative Way Wright City, MO 63390

(636) 745-7757

Fax: (636) 745-2874

\\Mbserver01\Engineering\Product\Product Documentation\2500 180 HYD Bender\Bend Stop Instructions\Bend Stop Hook Up Instructionsl VER2.doc Rev2 12-14-2006

2500-400 Bend Stop

For 2500 180° Hydraulic Bender

1. Check to see if your bender has the old style (simple angle iron) or new style mount as shown

below. If you have the old style bracket go to step #2. If you have the new style bracket go to step

# 3.

2. If you have the old style mount, remove the return spring carefully and then unbolt the bracket

from the rack.

3. Mount the new style bracket to the rack being sure to use the 1-1/4” long allen bolt, flat washer &

lock washer in the hole closest to the cylinder. This is critical so the rack does not bind on the

cylinder.

4. Bolt the STOP WHEEL assembly to the new style bracket. Use the supplied shoulder bolt, spring

washer and Nylock nut installed as shown below. Install the DETENT BUTTON as shown, set the

tension and then jam the nut.

5. Bolt the Air Switch bracket to the bearing mounting block. Remove the installed bolts and use the

supplied 1-1/2” allen bolts to attach the bracket. Be sure the bolts are TIGHT.

New Style Bracket

1-1/4” Bolt with

washer & lock

washer installed.

Cylinder

Stop Wheel

Assembly

r B

Spring Washer

Nylok Nut

Detent Plunger

Air Switch

Bracket

3/8” x 1-1/2” Long

Supplied Bolts

1 2 3

2500-400 Bend Stop 1

Summary of Contents

Page 1 - 2500-400 Bend Stop

Division of Mittler Corp. P.O. Box 110 Foristell, Missouri 63348 10 Cooperative Way Wright City, MO 63390 (636) 745-7757Fax: (636) 745-2874 \\

Page 2

- 2 -6. Bolt the AIR SWITCH to the mounting block using the ¼” x 1” allen bolts as shown below. Be sure the button end is pointed toward the cylinde

Page 3

- 3 -16. The other two stops can be set in the same way for other degrees or tubing sizes. A “cheat” sheet with STOP ROD lengths for different sizes

Mittler-bros-machine-tool 2500-400 Bend Stop User Manual

Browse online or download User Manual for Accessories for water Mittler-bros-machine-tool 2500-400 Bend Stop. Mittler Bros Machine & Tool 2500-400 Bend Stop User Manual

Summary of Contents

More documents for Accessories for water Mittler-bros-machine-tool 2500-400 Bend Stop

Comments to this Manuals

Mittler-bros-machine-tool 2500-400 Bend Stop User Manual

Browse online or download User Manual for Accessories for water Mittler-bros-machine-tool 2500-400 Bend Stop. Mittler Bros Machine & Tool 2500-400 Bend Stop User Manual

Summary of Contents

More documents for Accessories for water Mittler-bros-machine-tool 2500-400 Bend Stop

Comments to this Manuals

Related products and manuals for Accessories for water Mittler-bros-machine-tool 2500-400 Bend Stop