Mittler-bros-machine-tool 50220 User Manual download pdf

10” Wireless

RaceScale

Instructions

Racing Pr

oducts

10” Pads

If there is interference with the operation of the scales (ex. much slower operation

than normal or no operation at all) it may be necessarry to change the frequency.

This can be done by following these steps.

1. Set all scale pads out individually (at least 12” apart).

2. Pivot the hand held antenna until the antenna is perpindicular to the oor (this

is essential for communication between the pads and hand held) and turn the

hand held on by pushing the “ON/OFF” button. DO NOT turn the scale pads

on at this time.

3. When the menu appears, select “RF Frequency” by pressing the “OK” button.

Give the unit a few seconds to scan the channels and you will see numbers

appear under “ACTIVITY”. Scroll the arrow down and select the frequency

with the lowest number (least amount of interference) by pressing “OK”.

(Typically 903-915 commumicate the fastest.)

4. Turn the hand held off by pushing the “ON/OFF” button for 2 seconds.

5. Turn the scale pads on by switching the battery switch on each scale pad to

“ON” and press the reset button on the front of the black box.(Green light will

start blinking indicating power is on.)

6. Turn the hand held back on by pushing the “ON/OFF” button.

7. When the menu appears, select “Weigh Vehicle” by pressing the “OK” button.

Give the hand held 2 minutes to start communication with the scale pads.

When the red lights on ALL scale pads are blinking and numbers appear on

the scaling screen the frequency has been changed and the scales are ready

to use. If you nd that one scale does not blink red after 2 minutes, simply

turn that scale off and back on and press the reset button.

Frequency Change Instructions

For Further Technical Assistance Please Contact

Tanner Racing Products by MB

10 Cooperative Way Wright City, MO 63390

P.O. Box 110 Foristell, MO 63348

1-800-467-2464 Fax 1-636-745-2874

www.tannerracing.com

www.mittlerbros.com

1 2

Summary of Contents

Page 1 - Instructions

10” WirelessRaceScaleInstructionsRacing ProductsBy10” PadsIf there is interference with the operation of the scales (ex. much slower operationthan nor

Page 2

1. Set all scale pads out individually (at least 12” apart).2. Turn on the scale pads by switching the power switch on each scale pad to “ON” and pr

Comments to this Manuals

No comments

Mittler-bros-machine-tool 50220 User Manual

Browse online or download User Manual for Accessories for water Mittler-bros-machine-tool 50220. Mittler Bros Machine & Tool 50220 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Accessories for water Mittler-bros-machine-tool 50220